Tengzhou Hunter Machinery Co., Ltd
+8613969499628

Hydraulic Energy-saving Of CNC System

Sep 25, 2021

Energy-saving control principle

1. Reduce energy loss by simplifying the structure of the hydraulic system

⑴Fully closed CNC hydraulic system adopts a closed circuit supplied by a CNC bidirectional variable pump. The direction of the actuator is changed by changing the output port of the pump. There is no reversing valve, so there is no reversing valve and its valve port energy. loss.

⑵The movement speed of the actuator in the fully closed CNC hydraulic system is controlled by adjusting the output flow of the CNC bidirectional variable pump, without the need for a flow valve, so there is no throttling loss. Since there is no excess flow output, and there is no overflow valve in the system, there is no overflow loss.


2. A closed-loop control and monitoring system is formed by a microcomputer and sensors, which reduces energy loss.

⑴The rated pressure of the fully-closed CNC hydraulic system is set in the program. When the pressure detected by the pressure sensor reaches the programmed value, the variable pump will stop increasing the flow, or reduce it to close to zero, thus realizing system safety protection.

⑵The oil supplement circuit is set in the closed circuit to supplement the lack of flow in the main circuit pipeline (such as the new system needs to be filled with liquid in the closed circuit; after disassembly and repair, the closed circuit needs to be filled with liquid; the closed circuit needs to be filled due to external leakage during work Liquid replenishment in a closed loop; due to heat exchange, it is necessary to replenish liquid in a closed loop, etc.) The traditional closed circuit charge pump and its overflow valve and one-way valve group work continuously, while the fully-closed CNC hydraulic monitoring system reduces energy loss and hardly generates heat, so the number of heat exchanges is reduced and the compensation is reduced. Working hours of the oil pump. Therefore, the energy consumed by the charge pump, the overflow loss of the overflow valve, the one-way valve group and the valve port loss of the reversing valve are reduced.

(3) Install a temperature sensor on the pipeline. The single-chip microcomputer automatically detects the temperature of the system medium through the sensor. When the medium temperature exceeds the standard, the heat exchange device is opened, thereby reducing the valve port loss of the reversing valve in the heat exchange device.

⑷Install pressure and flow sensors on the pipeline, and the control system will automatically detect the sensor feedback signals, and adjust the system according to the program setting values, thereby reducing the flow and pressure excess.⑸ Install speed and torque sensors on the output shaft of the motor, and the control system will control according to the principle of power matching, which reduces thethe energy loss caused by power mismatch.

3. Using power matching technology according to different working conditions to reduce energy loss

The fully closed CNC hydraulic system works on the principle of power matching under different working conditions under the control of the monitoring system. The system automatically controls the controlled system according to the power matching criteria set by the program (matching the output power of the hydraulic system with the power required by the load), that is, after the control system collects the system parameters, the output power of the digital pump (the pressure of the high-pressure pipeline) is automatically controlled. The product of the flow rate) Pip is compared with the output power of the motor (the product of torque and speed) Pom. If Pip>Pom, the stepping motor is controlled to rotate to reduce the output flow of the digital pump until iPom=Pip; otherwise, stepping The reverse rotation of the motor increases the flow of the digital pump until Pom=Pip. When the load changes, this balance is destroyed again, so the microcontroller continues to drive the stepper motor to rotate until it reaches a new balance.