Tengzhou Hunter Machinery Co., Ltd
+8613969499628

Precautions for starting the four-column hydraulic press

Oct 22, 2021

1. Check whether the four-column hydraulic oil pump, control valve, and pressure gauge are normal, and whether the oil temperature is within the allowable range;

2. Check whether the mold has cracks and whether the fastening screws are loose;

3. Turn on the power switch of the four-column hydraulic press and start the cooling cycle motor;

4. The four-column hydraulic press starts the main oil pump motor;

5. Check the oil level of each oil tank, whether there is oil leakage in each oil circuit and hydraulic pipe fittings, and whether each connection piece is loose;

6. Check the deflection of the pressure pointer of the pressure gauge. If you find that it is swinging or not moving, you should stop and check the rated pressure of the equipment, and do not exceed the limit during use:

7. Check and clean up the work surface or mold of the four-column hydraulic press. Other sundries on it:

8. Adjust the working mode switch to the 0 position, perform manual operation, check whether the upper and lower limit switches of the movable beam are safe and reliable, whether the hydraulic system of the four-column hydraulic press has abnormal noise, whether the photoelectric eye, operation button, emergency stop switch, and safety protection device are flexible reliable;

9. After everything is normal, select the work switch according to the required work mode.

YH32-500T3