What are the precautions when purchasing a one-way valve for a 315 ton hydraulic press?
When selecting a one-way valve, in addition to selecting the opening pressure reasonably according to the needs, special attention should be paid to the flow rate matching the rated flow of the valve during operation, because when the flow through the one-way valve is much less than the rated flow, the single The valve sometimes vibrates. The smaller the flow, the higher the opening pressure, and the more gas in the oil, the easier it is to produce vibration.

2. When using, be sure to recognize the direction of the inlet and outlet ports to ensure that the installation is correct, otherwise it will affect the normal operation of the hydraulic system. Especially the one-way valve is used at the outlet of the pump, such as reverse installation may damage the pump or burn out the motor. However, the improper installation position of the one-way valve will cause the suction failure of the hydraulic pump with weak self-priming ability, especially the hydraulic pump with small displacement. Therefore, it should be avoided to install the one-way valve directly at the outlet of the hydraulic pump, especially when the hydraulic pump is a high-pressure vane pump, a high-pressure plunger pump, and a screw pump. If it is unavoidable, when the one-way valve must be installed directly at the outlet of the hydraulic pump, necessary measures should be taken to prevent the hydraulic pump from cavitation failure. For example, open an exhaust port on the joint or flange connecting the hydraulic pump and the one-way valve. When the hydraulic pump has a suction failure, you can loosen the exhaust screw plug to directly discharge the air in the pump. If it is not enough, you can fill the pump from the exhaust port to solve the problem. Or make the suction port of the hydraulic pump lower than the lowest liquid level of the oil tank so that the oil can automatically fill the pump body by its own weight; or choose a check valve with a smaller opening pressure and other measures.





