800 ton saggar, crucible forming hydraulic press_Graphite saggar, crucible press
The 800-ton saggar and crucible forming hydraulic press is a new type of press equipment specially used for pressing refractory saggars produced by Hunter Machinery Hydraulic Press Manufacturer. The body structure is generally four beams and four columns. Realize the molding process of various saggars. The product has beautiful appearance, high density and good uniformity. The machine adopts PLC control system, the running speed of the machine is adjustable, and the flexibility is good.
The saggar forming hydraulic press adopts a four-beam and four-column structure: the fuselage consists of an upper beam, a slider, a demoulding beam, a workbench, a column, etc. The upper beam and the workbench form a closed frame through the column and nuts, and the body is rigid. and good precision retention. The slider moves up and down along the column. The column guide sleeve is made of composite material to increase the allowable surface pressure and reduce friction. The column material is made of 45# steel, which is surface-treated and plated with hard chrome to improve wear resistance and durability. . The welded fuselage frame is tempered to eliminate welding internal stress and ensure that the machine is not easily deformed for long-term use. The position of the worktable, the T-slot of the slider and the size of the inner cavity of the lower worktable should be well matched with the mold for production. The hydraulic oil cylinder adopts a single-cylinder structure and is arranged in the upper beam. The cylinder body is fixed with the upper beam through the flange, and the piston rod is connected with the movable beam through the connecting flange. The material of the cylinder body is high-quality 45# steel forged to ensure uniform material; all the surfaces of the piston rods are quenched, and the cylinder is subjected to a pressure test (1.1 times). The material of the column is 45# steel quenched and tempered, and the column is fastened with nuts to facilitate the pre-tightening of the body. The column is quenched and tempered, and the surface of the guide part is plated with hard chrome 0.05mm, which improves the surface precision, wear resistance and strong anti-eccentric load capacity.

The new graphite saggar production process formula:
1. Recipe: First mix high-purity graphite powder (400 mesh), asphalt powder (200 mesh) ketone-based binder, and cellulose in a ratio of 100 to 15 to 6 to 5.
2. Heating and kneading: Then heating and kneading, after kneading,
3. New-type saggar hydraulic press molding: the molding is put into an 800-ton four-beam four-column hydraulic press for molding, and two-way pressure is applied;
4. Demoulding: using demoulding beams, perfect demoulding;
5. Drying: drying after demoulding, the hardness can reach 40 after drying;
6. Asphalt impregnation: then put it into the asphalt impregnation tank for impregnation, the temperature is 220 degrees, the negative pressure is first for one hour, and then the pressure is 10 MPa for one hour;
7. Roasting and graphitization: scrape off the residue of the asphalt solution, conduct roasting and graphitization, add a graphitization catalyst to complete roasting and graphitization at one time, the initial temperature is 200 degrees to carbonize the cellulose, and then 300 degrees, so that the asphalt enters the coking Then, the temperature is raised to completely coke and carbonize the pitch, and then the temperature is raised to 1600 degrees to activate the graphitization catalyst and allow the asphaltene carbon to be graphitized at a low temperature;
8. Complete the graphite carbonization to obtain the finished product: the graphite sagger is generally 10mm thick, and the graphitization process is basically completed when the graphitization time reaches 30 hours, and then the temperature is slowly lowered to below 300 degrees, and the firing is completed;
This formula has a high shrinkage force, generally shrinking by 4-5%, the size will become smaller, the density will increase, the resistance will become smaller, the flexural resistance will increase, and it has mechanical properties.
Hot Tags: 800 ton saggar, crucible forming hydraulic press_graphite saggar, crucible press, China, suppliers, manufacturers, factory, customized, wholesale, cheap, discount, in stock, Four column Hydraulic Press With Grating Protection, Four column Hydraulic Press With Movable Worktable, cold press machine for oil, 500T Four column Hydraulic Press, Sheet Stretch Forming Hydraulic Press Machine, electric hydraulic press machine








