Horizontal Bearing Applying Hydraulic Press of Electric Machine Stator China Manufacturies

We seize strategic opportunities to strengthen our Auto Parts Drawing Hydraulic Press, automatic press machine, hydraulic machine press's development and manufacturing. Our company constantly update all kinds of production equipment, constantly expand the production scale, and we have been working hard in order to win more orders. We believe that our employees' aspiration for a better life is the goal of our management.

200T frame heading machine

Features:

Locking, piercing, and anchoring can be completed at one time, with fast speed, high efficiency, simple operation and convenient carrying;

It is welded with high-strength steel, tempered and shaken by aging treatment, and the frame design is subjected to finite element analysis, which has the characteristics of high rigidity, high precision and small machine deformation;

Requirements:

1. Use YB-N46 hydraulic oil

2. The steel bar must be aligned with the pier mold, otherwise the three-jaw fixture will be destroyed and scrapped

3. It has been adjusted to 35MPA at the factory, and can be adjusted at will during use

4. Do not separate the joints as much as possible on site to prevent debris from polluting the hydraulic system

5. It is not allowed to use high-pressure tubing to lead the pier and electric oil pump

6. When the working site voltage is lower than 360 volts, stop using

7. Carry out a comprehensive inspection of the electrical circuits and hydraulic systems of the equipment before the shift, and should not put them into use if there are abnormal conditions.

8. If there is any abnormal situation during use, stop and check, and after the professional repair personnel eliminate the fault, re-use after confirming that it is normal.

9. The operator strictly follows the requirements of the building design and operates according to the pressure readings

10. Maintenance must be carried out after the shift to keep it clean

11. Frequently used pier machines should change working fluid every three months, clean the system, and replace all seals every two years.

Product parameters:

Field of use:

The hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, punching, bending of thin plates, and so on. It can also be used in calibration, press fitting, grinding wheel molding, plastic products and powder products press molding.

1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.

2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.

3. Kitchen utensils: sinks, pots, and other containers.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, and many years of production experience to meet your ordering needs.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

'Sincerity, Innovation, Rigorousness, and Efficiency' is the persistent conception of our firm for the long-term to create jointly with consumers for Horizontal Bearing Applying Hydraulic Press of Electric Machine Stator China Manufacturies. We warmly welcome domestic and overseas customers to visit our company and have business talk. Salary not only affects the enthusiasm of employees, but also plays an important role in the cultivation of employee satisfaction, enterprise cohesion and the formation of a harmonious atmosphere.