Small/Automatic/Manual Horizontal Hydraulic Press 100ton 200ton 1000 Ton

We uphold the tradition of independent innovation and the pursuit of excellence, and continue to conduct technological research and development in the field of extrusion press, metal forging machine, plastic extrusion machine for key user applications. Our company keeps up with the increasingly fierce market management and is ready to do a good job in the face of increasingly fierce competition. Our company has long insisted on the innovative business philosophy of "technology and quality".

200T frame heading machine

Features:

Locking, piercing, and anchoring can be completed at one time, with fast speed, high efficiency, simple operation and convenient carrying;

It is welded with high-strength steel, tempered and shaken by aging treatment, and the frame design is subjected to finite element analysis, which has the characteristics of high rigidity, high precision and small machine deformation;

Requirements:

1. Use YB-N46 hydraulic oil

2. The steel bar must be aligned with the pier mold, otherwise the three-jaw fixture will be destroyed and scrapped

3. It has been adjusted to 35MPA at the factory, and can be adjusted at will during use

4. Do not separate the joints as much as possible on site to prevent debris from polluting the hydraulic system

5. It is not allowed to use high-pressure tubing to lead the pier and electric oil pump

6. When the working site voltage is lower than 360 volts, stop using

7. Carry out a comprehensive inspection of the electrical circuits and hydraulic systems of the equipment before the shift, and should not put them into use if there are abnormal conditions.

8. If there is any abnormal situation during use, stop and check, and after the professional repair personnel eliminate the fault, re-use after confirming that it is normal.

9. The operator strictly follows the requirements of the building design and operates according to the pressure readings

10. Maintenance must be carried out after the shift to keep it clean

11. Frequently used pier machines should change working fluid every three months, clean the system, and replace all seals every two years.

Product parameters:

Field of use:

The hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, punching, bending of thin plates, and so on. It can also be used in calibration, press fitting, grinding wheel molding, plastic products and powder products press molding.

1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.

2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.

3. Kitchen utensils: sinks, pots, and other containers.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, and many years of production experience to meet your ordering needs.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

Through the unremitting efforts of all colleagues in our company, relying on the long-term patronage of new and old customers, our company is growing stronger, the production technology is increasingly mature, the Small/Automatic/Manual Horizontal Hydraulic Press 100ton 200ton 1000 Ton quality is stable and the price is more advantageous. We always adhere to the operating principle of customer demand-oriented, and strive to achieve a win-win situation with customers. In the era of speed and change, our company is born for high-quality, and scientific development.