The working process of the ejector cylinder of the column hydraulic press is also very simple. When the main cylinder of the hydraulic press stops moving, the operator presses the ejection button, the corresponding electromagnet is energized, the cartridge valve is opened, and the hydraulic oil enters the ejector cylinder through the cartridge valve. The lower chamber of the hydraulic press, and the oil in the upper chamber flows back into the oil tank, the workpiece is ejected, and the ejection cylinder will be returned after being ejected; then, the operator of the four-column hydraulic press presses the return button, the electromagnet loses power, Open the cartridge valve, the hydraulic oil enters the upper chamber of the ejector cylinder, the oil in the lower chamber flows back to the oil tank, and the ejector cylinder returns, forming a circulatory system to maintain the continuous movement of the four-column hydraulic press.
In the past, there were many customers who consulted online. When asked whether they needed to eject the cylinder, many of them did not know the function of the ejector, so let's introduce:
Most four-column hydraulic presses have ejector cylinders, because during the hydraulic machining process, a part is needed to help remove the product from the mold, and the ejector cylinder plays this role.
To put it simply, the ejector cylinder plays the role of demoulding in the four-column hydraulic press, and pushes the workpiece out of the concave mold. However, since the ejector cylinder is also an important component and the cost is high, the ejector cylinder is equipped with an ejector cylinder. Four-column hydraulic presses are a little more expensive than ordinary hydraulic presses, which everyone should understand.
The working process of the ejector cylinder of the four-column hydraulic press is also very simple. When the main cylinder of the hydraulic press stops moving, the operator presses the ejection button, the corresponding electromagnet is energized, the cartridge valve is opened, and the hydraulic oil enters the ejector cylinder through the cartridge valve. The lower chamber of the hydraulic press, and the oil in the upper chamber flows back into the oil tank, the workpiece is ejected, and the ejection cylinder will be returned after being ejected; then, the operator of the four-column hydraulic press presses the return button, the electromagnet loses power, Open the cartridge valve, the hydraulic oil enters the upper chamber of the ejector cylinder, the oil in the lower chamber flows back to the oil tank, and the ejector cylinder returns, forming a circulatory system to maintain the continuous movement of the four-column hydraulic press.
Now everyone knows that the work of the four-column hydraulic press to eject the cylinder is very simple, the ejection and the return stroke, but the movement of the ejection cylinder can only start after the movement of the main cylinder of the hydraulic press is completed. The two movements are closely related, otherwise it will cause abnormality or safety. ACCIDENT.






