The press (including punches and hydraulic presses) is a universal press with a sophisticated structure. It has a wide range of uses and high production efficiency. The press can be widely used in cutting, punching, blanking, bending, riveting and forming processes. By applying strong pressure to the metal blank, the metal is plastically deformed and fractured to be processed into parts. When the mechanical press is working, the motor drives the large pulley (usually doubled as a flywheel) through the V-belt, and drives the crank slider mechanism through the gear pair and the clutch to make the slider and the punch go straight down. After the mechanical press is completed, the slider travels upward, the clutch is automatically disengaged, and the automatic on the crankshaft is turned on to stop the slider near the top dead center.





