1000 tons three-beam four-column hydraulic press (YQ32-1000T) four-column hydraulic press
The 1000-ton three-beam four-column hydraulic press (YQ32-1000T) is a large-scale hydraulic press produced by Shandong Woda Heavy Industry. The fuselage is welded with all steel plates; four corners and eight sides are guided by right-angle guide rails, with high precision and good rigidity, and hydraulic preload is adopted. The hydraulic system adopts a two-way cartridge integrated valve; the whole system of the 1000-ton three-beam four-column hydraulic press works stably, reliably, has a long service life, less leakage, and fewer failure points. The electrical system is controlled by "PLC" programmable controller, and can be equipped with proportional voltage regulation, stroke digital display, photoelectric protection device and mobile workbench (convenient for mold replacement) according to user requirements.
Large-scale 1000-ton three-beam four-column hydraulic press (YQ32-1000T) four-column hydraulic press structure and features:
The 1000-ton three-beam four-column hydraulic press is composed of two parts: the main engine and the control mechanism, which are connected by pipelines and electrical devices to form a whole. The main engine part is a gantry structure, including the fuselage, main cylinder, limit device, etc. The control mechanism includes a hydraulic pump station (power system), an electrical box, and other components.
1. It adopts three-beam and four-column structure, which has good guiding stability and high precision.
2. Using computer-aided design software to optimize structural performance, and through steel aging and tempering, etc., the rigidity and wear resistance are excellent.
3. The designed working surface is large, which can meet the installation and use of larger molds, and is suitable for various stretching, extrusion, forming, stamping, forging and other processes.
4. The hydraulic circuit designed and adopted is simple and practical, with low power consumption, high output pressure, low failure rate and low maintenance cost.
5. Guide rail automatic lubrication device.
6. Mechatronic safety device. Such as: the supporting circuit of the lower chamber of the oil cylinder, the interlocking circuit of the upper and lower chambers of the oil cylinder, etc., with superior safety.
7. The electrical system is controlled by PLC.
8. It can realize two molding processes of constant pressure and fixed stroke. It has the function of maintaining pressure and delaying time, and the delay time is adjustable.
9. The working pressure and stroke can be adjusted within the specified range according to the process requirements, and the operation is easy.
The 1000-ton three-beam and four-column hydraulic press is widely used in press forming, embossing, press fitting, stretching, cutting and other processes. Such as auto parts, hardware manufacturing, glasses, watches, tableware, badge jewelry, toys, electronics, rubber vulcanization, EV foaming, printing, powder metallurgy, mold manufacturing and other industries.
