Thick Plate 8-10mm Sheet Metal Stamping Press

We have processed important scientific and technological 500T Energy saving Brake Pad Press, c type hydraulic press, 50T Bow Type Hydraulic Press, which embodies the burning passion, hard work and innovative wisdom of all employees, creating our own value for our company. In order to realize the transformation from manufacturing to creation and build innovative enterprises, it is necessary to promote the upgrading of development mode. Only with a strong reserve of talents can we be invincible in the fierce market competition.

200T frame heading machine

Features:

Locking, piercing, and anchoring can be completed at one time, with fast speed, high efficiency, simple operation and convenient carrying;

It is welded with high-strength steel, tempered and shaken by aging treatment, and the frame design is subjected to finite element analysis, which has the characteristics of high rigidity, high precision and small machine deformation;

Requirements:

1. Use YB-N46 hydraulic oil

2. The steel bar must be aligned with the pier mold, otherwise the three-jaw fixture will be destroyed and scrapped

3. It has been adjusted to 35MPA at the factory, and can be adjusted at will during use

4. Do not separate the joints as much as possible on site to prevent debris from polluting the hydraulic system

5. It is not allowed to use high-pressure tubing to lead the pier and electric oil pump

6. When the working site voltage is lower than 360 volts, stop using

7. Carry out a comprehensive inspection of the electrical circuits and hydraulic systems of the equipment before the shift, and should not put them into use if there are abnormal conditions.

8. If there is any abnormal situation during use, stop and check, and after the professional repair personnel eliminate the fault, re-use after confirming that it is normal.

9. The operator strictly follows the requirements of the building design and operates according to the pressure readings

10. Maintenance must be carried out after the shift to keep it clean

11. Frequently used pier machines should change working fluid every three months, clean the system, and replace all seals every two years.

Product parameters:

Field of use:

The hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, punching, bending of thin plates, and so on. It can also be used in calibration, press fitting, grinding wheel molding, plastic products and powder products press molding.

1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.

2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.

3. Kitchen utensils: sinks, pots, and other containers.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, and many years of production experience to meet your ordering needs.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

We always base on honesty, keep our promise, and provide customers with genuine Thick Plate 8-10mm Sheet Metal Stamping Press and sincere services. The company will provide products of different specifications according to the needs of customers, saving costs for customers and increasing competitiveness. Our products are mainly exported to many countries all over the world.