Multi-Station Rotary Tube End Forming Machine for Metal Tube of HVAC Industry

We adhere to high standards of product design and quality requirements to provide consumers with quality Sheet Stretch Forming Hydraulic Press Machine, 500T Salt Brick Powder Forming Press, Anti theft Door Forming Hydraulic Press. We implement the strategy of green development and build and protect clear water and blue sky through continuous investment and strict management. Under the conditions of market economy, service as a commodity also has value, and the degree of user satisfaction is the determining factor of whether the service can produce the greatest value, therefore, we always take user satisfaction as the eternal pursuit.

YH32 special press bolt machine

Features:

1. The fuselage adopts a three-beam and four-column structure. The upper beam and the worktable are combined into a fixed frame through the column, fastening nut and adjusting nut. The accuracy of the frame is adjusted by the adjusting nut, which has good strength, rigidity and accuracy retention.

2. Large parts such as upper beams, workbenches, and sliding blocks are welded parts of steel plates. After computerized design, their strength, rigidity, structure, anti-deformation, etc. all meet the standards and requirements for use, and have a sufficient safety factor; carbon dioxide is used Gas shielded welding and manual arc welding, the welding quality meets the requirements, and the deformation stress is eliminated through aging vibration treatment.

3. Slide block: steel plate welded parts with box-shaped structure. The guide sleeve at the four-pillar guide hole is made of nano-molecular composite material, which has good resistance and precision retention. There is a T-shaped groove on the lower plane of the slider for installing the mold.

4. Upper beam: steel plate welded parts of box-shaped structure, with main working oil cylinder inside, and liquid-filled oil tank on it.

5. Workbench: Steel welded structural parts, which are connected to the upper beam and sliding block to form the main machine through the column.

6. Cylinder: It adopts a five-cylinder design, is arranged in the upper beam hole, and is sealed with double imported sealing rings. The guiding part is treated with welded copper, which is well sealed and has strong wear resistance. The material of the cylinder body is No. 45 forged steel, and the forging is 3 Grade (GB/13315-1991) forgings have passed the ultrasonic flaw detection and the hardness of quenching and tempering treatment is qualified.

7. There is an ejector device under the workbench, which is mainly used for ejection and material return processes, and can also be used for the forming process of reverse-stretched parts.

8. Column: The material is 45# forged steel, after quenching and tempering, the surface is plated with hard chromium to increase the wear resistance and the hardness is qualified.

9. The nut material is 45# forged steel, which matches the thread on the column to lock the body.

10. Limit device: Located on the right side of the main body, the travel switch controls the upper and lower limit positions. Adjusting the upper and lower limit switches means adjusting the up and down movement position of the slider.

Product parameters:

Applicable fields (part of tooling required to be purchased):

● Press-fit large transmission gears and shafts

● Correcting the front axle

● Correcting deformed workpieces

● Disassembly and assembly of cylindrical cone bearings

● Replace the diaphragm spring of the automobile clutch

● Press-fit the bearing outer ring of the bearing

● Replace the reaction rod rubber assembly

● Disassembly and assembly of various tight-fitting parts

● Change the clutch plate stop pin buffer spring

● Riveting, cutting, and casting rear axle basin tooth rivets

● There are various pin sleeves for press-fitting piston pins and steering knuckle main pins

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, many years of production experience, to meet your ordering needs, specializing in the production of single-column hydraulic press, four-column hydraulic press, powder forming hydraulic press, stretch forming hydraulic press, various A variety of auto parts presses, machines that can process metal, plastic, rubber, wood, powder and other products.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

Our company's quality policy is to create high-quality Multi-Station Rotary Tube End Forming Machine for Metal Tube of HVAC Industry, ensure quality service and win customer satisfaction. We use advanced processing equipment and strict quality management system, while providing customers with professional design and technical guidance, products are popular both at home and board. The company's mission is to provide employees with development opportunities and take responsibility for society, attracting outstanding scientists at home and abroad to form innovative teams.