Manual Two Column Hydraulic Press HP-100s, 2 Column Press Machine

Our Hydraulic Punching Machine, hydraulic power press, Train Wheel Pair Pressing Hydraulic Press does have good quality and every product is strictly inspected to be purchased and used with confidence. Our company is not only a well-functioning electronic organization, but also a living entity that can achieve growth and evolution. Our business aim is to provide you the best quality products at the most competitive prices. We expect a long term business relations with our customers, any comments or enquiry from you will receive our most careful and immediate attention, welcome to visit us and contact us! With us, you can find high-quality products and get the most considerate service.

1000T Auto Parts Stretch Forming Hydraulic Press

Features:

Computer optimized structure design, the four-column structure is simple, economical and practical; the frame structure has good rigidity, high precision, and strong anti-eccentric load ability.

The hydraulic control adopts a cartridge-type basic system, which is reliable in action, long in service life, and small in hydraulic shock, which reduces the connecting pipes and leakage points.

The electrical system controlled by PLC is compact, sensitive, reliable, and flexible.

There are three operation modes: adjustment, single cycle with both hands, and continuous work (with feeding device).

Through the selection of the operation panel, not only can the two forming processes of fixed stroke and constant pressure be realized, but also three process working cycles of with pad, without pad and ejector can be realized.

1. The fuselage adopts a three-beam and four-column structure. The upper beam and the workbench are combined into a fixed frame through the column, fastening nut and adjusting nut. The accuracy of the frame is adjusted by the adjusting nut, which has good strength, rigidity and accuracy retention.

2. Large parts such as upper beams, workbenches, and sliding blocks are steel welded parts, optimized by computer, and their strength, rigidity, structure, and deformation resistance meet the standards and requirements for use, and they have sufficient safety factors; carbon dioxide gas is used Protected welding and manual arc welding, welding quality meets the requirements, and deformation stress is eliminated through aging vibration treatment.

3. Slide block: steel plate welded parts with box-shaped structure. The material of the guide sleeve at the four-pillar guide hole is nano-molecular composite material, which has good durability and precision retention. There is a T-shaped groove on the lower plane of the slider for installing the mold.

4. Upper beam: steel plate welded parts of box-shaped structure, with main working oil cylinder inside, and liquid-filled oil tank on it.

5. Workbench: Steel welded structural parts, which are connected to the upper beam and sliding block to form the main machine through the column.

6. Cylinder: It adopts a five-cylinder design, is arranged in the upper beam hole, and is sealed with double imported sealing rings. The guiding part is treated with welded copper, which is well sealed and has strong wear resistance. The material of the cylinder body is No. 45 forged steel, and the forging is 3 Grade (GB/-1991) forgings have passed the ultrasonic flaw detection and the hardness of the quenching and tempering treatment is qualified.

7. There is an ejector device under the workbench, which is mainly used for ejection and material return processes, and can also be used for the forming process of reverse-stretched parts.

8. Column: The material is 45# forged steel, after quenching and tempering, the surface is plated with hard chromium to increase the wear resistance and the hardness is qualified.

9. The nut material is 45# forged steel, which matches the thread on the column to lock the body.

10. Limit device: Located on the right side of the main body, the travel switch controls the upper and lower limit positions. Adjusting the upper and lower limit switches means adjusting the up and down movement position of the slider.

Product parameters:

Field of use:

The three-beam and four-column hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, punching, bending of thin plates, and so on. It can also be used in calibration, press fitting, grinding wheel molding, plastic products and powder products press molding.

1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.

2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.

3. Kitchen utensils: sinks, pots, and other containers.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, and many years of production experience to meet your ordering needs.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

Our company will conscientiously fulfill its social responsibilities, keep in mind the value mission, do a good job of products and services wholeheartedly, and open up a bright future for the Manual Two Column Hydraulic Press HP-100s, 2 Column Press Machine industry! Corporate culture is the necessary condition for the survival and development of enterprises, the premise and foundation for the establishment of core competitiveness of enterprises, and the fundamental guarantee for enterprises to achieve sustainable development. We are committed to providing products and services in a safe and clean manner, actively participating in social welfare and serving social development.