Lab 5t Small Manual Hydraulic Press

For a long time, our 3000T Simple Frame Embossing Machine, Eight column Three beam Hydraulic Press, press hydraulic has enjoyed a good reputation in the domestic and international markets for their reasonable price and superior performance, and has been recognized by our customers! To develop the market with new products and stabilize the market with reputation and service is the foundation for our enterprise to survive and develop. Our company: talent reputation is the capital, pragmatic based, innovation is the driving force for development.

1000T Auto Parts Stretch Forming Hydraulic Press

Features:

Computer optimized structure design, the four-column structure is simple, economical and practical; the frame structure has good rigidity, high precision, and strong anti-eccentric load ability.

The hydraulic control adopts a cartridge-type basic system, which is reliable in action, long in service life, and small in hydraulic shock, which reduces the connecting pipes and leakage points.

The electrical system controlled by PLC is compact, sensitive, reliable, and flexible.

There are three operation modes: adjustment, single cycle with both hands, and continuous work (with feeding device).

Through the selection of the operation panel, not only can the two forming processes of fixed stroke and constant pressure be realized, but also three process working cycles of with pad, without pad and ejector can be realized.

1. The fuselage adopts a three-beam and four-column structure. The upper beam and the workbench are combined into a fixed frame through the column, fastening nut and adjusting nut. The accuracy of the frame is adjusted by the adjusting nut, which has good strength, rigidity and accuracy retention.

2. Large parts such as upper beams, workbenches, and sliding blocks are steel welded parts, optimized by computer, and their strength, rigidity, structure, and deformation resistance meet the standards and requirements for use, and they have sufficient safety factors; carbon dioxide gas is used Protected welding and manual arc welding, welding quality meets the requirements, and deformation stress is eliminated through aging vibration treatment.

3. Slide block: steel plate welded parts with box-shaped structure. The material of the guide sleeve at the four-pillar guide hole is nano-molecular composite material, which has good durability and precision retention. There is a T-shaped groove on the lower plane of the slider for installing the mold.

4. Upper beam: steel plate welded parts of box-shaped structure, with main working oil cylinder inside, and liquid-filled oil tank on it.

5. Workbench: Steel welded structural parts, which are connected to the upper beam and sliding block to form the main machine through the column.

6. Cylinder: It adopts a five-cylinder design, is arranged in the upper beam hole, and is sealed with double imported sealing rings. The guiding part is treated with welded copper, which is well sealed and has strong wear resistance. The material of the cylinder body is No. 45 forged steel, and the forging is 3 Grade (GB/-1991) forgings have passed the ultrasonic flaw detection and the hardness of the quenching and tempering treatment is qualified.

7. There is an ejector device under the workbench, which is mainly used for ejection and material return processes, and can also be used for the forming process of reverse-stretched parts.

8. Column: The material is 45# forged steel, after quenching and tempering, the surface is plated with hard chromium to increase the wear resistance and the hardness is qualified.

9. The nut material is 45# forged steel, which matches the thread on the column to lock the body.

10. Limit device: Located on the right side of the main body, the travel switch controls the upper and lower limit positions. Adjusting the upper and lower limit switches means adjusting the up and down movement position of the slider.

Product parameters:

Field of use:

The three-beam and four-column hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, punching, bending of thin plates, and so on. It can also be used in calibration, press fitting, grinding wheel molding, plastic products and powder products press molding.

1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.

2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.

3. Kitchen utensils: sinks, pots, and other containers.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, and many years of production experience to meet your ordering needs.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

Under the influence of inherent organizational characteristics and value orientation, we guarantee the stability of the quality of the provided Lab 5t Small Manual Hydraulic Press. In the course of economic globalization, our company has become one of the main carriers of economic globalization. Compared with similar products, our products show superior performance.