1. Energy saving:
Compared with ordinary hydraulic machines, servo hydraulic machines do not contain proportional servo valves or proportional pumps in the overall control of the system. Servo-driven hydraulic machines have the advantages of energy saving, low noise, low temperature rise, good flexibility, high efficiency, and convenient maintenance, which can replace the existing ones. Most ordinary hydraulic presses have broad market prospects. Compared with traditional hydraulic presses, the energy-saving effect is significant. Depending on the processing technology and production cycle, servo-driven hydraulic presses can save 30% to 70% of electricity compared to traditional hydraulic presses.
2. Low noise:
Servo-driven hydraulic oil pumps generally use internal gear pumps or high-performance vane pumps. Traditional hydraulic machines generally use axial piston pumps. Under the same flow and pressure, the noise of internal gear pumps or vane pumps is 5dB lower than that of axial piston pumps. ~10dB. The motor of the servo-driven hydraulic press runs at the rated speed during compression and return, and its emission noise is 5dB~10dB lower than that of the traditional hydraulic press. When the slider is fast falling and the slider is stationary, the speed of the servo motor is 0, so the servo-driven hydraulic machine basically has no noise emission. In the pressure-holding stage, due to the low motor speed, the noise of the servo-driven hydraulic machine is generally less than 70dB, while the noise of the traditional hydraulic machine is 83dB~90dB.
3. Less heat and cost reduction:
Since the hydraulic system of a servo-driven hydraulic press has no overflow heating and no flow when the slider is stationary, there is no hydraulic resistance heating. The heating value of the hydraulic system is generally 10% to 30% of that of a traditional hydraulic press. Since the system generates less heat, most servo-driven hydraulic presses do not need to be equipped with a hydraulic oil cooling system, and some with larger heat generation can be equipped with a low-power cooling system. Because the pump has the characteristics of zero speed and low heat most of the time, the oil tank of the servo-controlled hydraulic machine can be smaller than that of the traditional hydraulic machine, and the oil change time can be extended. Therefore, the hydraulic oil consumed by the servo-driven hydraulic machine is generally only about 50% of the traditional hydraulic machine.
4. High degree of automation, good flexibility and high precision:
The pressure, speed and position of the servo-driven hydraulic press are fully closed-loop digital control, with high degree of automation and good precision. In addition, its pressure and speed can be programmable to meet the needs of various processes, and it can also realize remote automatic control.
5. High efficiency:
Through appropriate acceleration and deceleration control and energy optimization, the speed of the servo-controlled hydraulic press can be greatly increased, and the working cycle is several times higher than that of the traditional hydraulic press, which can reach 10/min~15/min.
6. Convenient maintenance:
Because the proportional servo hydraulic valve, speed control circuit, and pressure control circuit in the hydraulic system are eliminated, the hydraulic system is greatly simplified. The cleanliness requirements of hydraulic oil are far less than hydraulic proportional servo systems, which reduces the impact of hydraulic oil pollution on the system.





