500T Energy-saving Brake Pad Press

500T energy-saving brake pad press

Features:

1. The equipment generates less heat, reduces cooling costs, and reduces the cost of hydraulic oil. The heat output of its hydraulic system is generally 10%-30% of that of a traditional hydraulic machine. This is because most of the time the pump has a zero-speed and low-heat characteristic. The oil tank of the hydraulic machine can be smaller than that of the traditional hydraulic machine, and the oil change time can also be extended. Therefore, the hydraulic oil consumption for driving a four-column hydraulic press is generally only about 50% of that of a traditional hydraulic press;

2. The high efficiency of the four-column hydraulic press: Through proper acceleration and deceleration control and energy optimization, the speed of the hydraulic press can be greatly improved, and the working rhythm can be several times higher than that of the traditional hydraulic press;

3. High degree of automation, good flexibility, and high precision. The pressure, speed and position of the four-column hydraulic press are all controlled by closed-loop digital control, with high degree of automation, good precision and wide application range;

4. Low noise: Internal gear pumps are generally used to drive hydraulic oil pumps, while axial plunger pumps are generally used in traditional hydraulic machines. After testing and calculation, the noise generated by 10 servo-driven hydraulic presses is lower than that of ordinary hydraulic presses of the same specification;

5. Energy saving and emission reduction: hydraulic and electronic control adopts intelligent energy-saving system, which can save energy by 50-70%;

6. High precision: Each machine is equipped with an infrared safety grating to effectively protect the operator and ensure that the machine's repeated positioning accuracy can reach (+0.03mm) and the pressure error (+1%);

7. Stable and durable: The frame structure of the whole machine and the sliding block are guided by precision guide rails, with strong impact resistance and side pressure resistance, stability, precision and durability, and suitable for process purposes such as punching, forming, and extrusion;

8. Low failure rate: Intelligent control system, the oil temperature is not easy to rise quickly, and the oil circuit system has no negative pressure, which greatly reduces failures and prolongs the service life of hydraulic components;

9. Easy to maintain: Because the proportional servo hydraulic valve, speed regulating circuit and pressure regulating circuit in the hydraulic system are eliminated, the hydraulic system is greatly simplified and the impact of hydraulic oil pollution on the system is reduced.

Product parameters:

Parameter	Unit	YH32-500T	YH32-630T	YH32-800T	YH32-1000T	YH32-1200T	YH32-1500T	YH32-1800T	YH32-2000T
Nominal pressure	KN	5000	6300	8000	10000	12000	15000	18000	20000
System pressure	Mpa	25	25	25	25	25	25	25	25
Effective itinerary	mm	1000	1000	1200	1500	1500	1500	1800	2000
Opening height	mm	1400	1500	1800	2000	2000	2500	2600	2800
Working desk size	mm	1600*1400	2000*1500	2200*1600	2800*2000	3000*2000	3000*2000	3200*2000	3500*2200
Power	KW	15*2	18.5*2	22*2	22*2	22*2	22*2	22*3	37*2

Applicable fields:

The press forming of FRP products series hydraulic press is divided into thermosetting forming and thermoplastic material forming, mainly the compression forming of composite materials such as SMC, BMC, DMC, GMT, etc. The products are widely used in railways, automobiles, aviation, ships, electrical appliances, meter boxes, Petrochemical, daily necessities and other industries.

Common problem:

Are you a manufacturer?

Yes, the company has a variety of high-precision production equipment and inspection equipment, a complete production team, many years of production experience, to meet your ordering needs, specializing in the production of single-column hydraulic press, four-column hydraulic press, powder forming hydraulic press, stretch forming hydraulic press, various A variety of auto parts presses, machines that can process metal, plastic, rubber, wood, powder and other products.

How to install the machine?

To provide customers with a full range of technical support, we can also send technicians abroad to install and train for our customers.

How about after-sales?

The company provides 24-hour after-sales service, after-sales service mailbox: huntermachinery@gamil.com

Hot Tags: 500t energy-saving brake pad press, China, suppliers, manufacturers, factory, customized, wholesale, cheap, discount, in stock, Special Hydraulic Press For Brake Pads, 500T Energy saving Brake Pad Press, Brake Pad Making Machine, Straightening Hydraulic Press Machine